Leading Manufacturer of vaccum rotary evaportor, rectangular water bath, sisco vacuum oven, water bath incubator shaker, serological water bath and magnetic stirrers from New Delhi.
·Digital Vacuum Rotary Evaporator (1 Liter)o With manual jack system and glass partso Digital Vacuum Rotary Evaporator (1 Liter)o With Motorized jack system and glass parto Digital Vacuum Rotary Evaporator (2 Liter)o With manual jack system and glass partso Digital Vacuum Rotary Evaporator (2 Liter)o With Motorized jack system and glass partsIt operates on siphoning principal, Consists of 5.5. washing cylinder and a removable pipette holder to accommodate pipettes up to 375 mms. In length. 10,000/-
These are sturdy double walled units with outer chamber made of MS. Sheet duly enamel painted with inner made up of anodized Aluminum or 5.5. Sheet. The gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated shelves to convenient height. The door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test temperature. Temperature is controlled by hydraulic type capillary thermostat from ambient to 70°C i 0.5oC. An L-shaped prismatic thermometer is fitted to unit for reading the chamber temperature. Air ventilators are also provided on the sides ofunit. To work on 220/230 Volts A.C. supply.
It is a double walled unit with inside made of thick 55. sheet and outer of M.S sheet duly enamel painted. The paramedical lid made of 5.5. prevents falling of condensed water droplets on the specimens. Heating is achieved through a immersion type heater an the temperature is controlled by hydraulic type thermostat with an accuracy of + 0.5 n C. The bath has an oscillation tray riding on bal rollers oscillated through a geared variable speed motor. Shaming speed range is between 4 to 140 cycles per minutes. The shaking tray can either hold test tubes or Erlenmeyer flasks of 25 ml or 5.0 ml or 100 ml or 250 ml or 1000 ml. as ordered by the users. (Kindly maintain the capacity of the flasks while ordering) Supplied complete with one shaking tray, paramedical cover, L-shaped thermometer cord and plug, to work on 200/230 volts A.C supply, Available with heating arrangement only (having temperature range from ambient to 100"C ) or with both heating and cooling arrangements (having temperature range from 5° to 1000 C)
It has a compact stirring device utilizing a rotating magnetic field (created by a Permanent Magnet) which includes variable speed stirring action. Stirring is accomplished by means of small telephone rotor, which when placed in the liquid to be stirred is capable of rotation by magnetic field applied from below the container. The unit is filled with pilot lamp. To work on 220/230 Volts A.C.
The Inner chamber steam jacket, outer chamber and boiler are made of heavy gauge stainless steel with leak proof argon is welding. The radial locking lid is made of thick S.S. plate. All units are hydraulically tested up to 40 psi. The space between the outer chamber and steam jacket is fitted with asbestos sheet or glass wool to minimize thermal losses. Steam boiler is fitted with water level indicate pressure gauge low water cut off device and automatic pressure control device with Digital Temp Controller inner temperature and vacuum break vacuum in case of formation of vacuum pressure due to steam condensation. Two super heater values are provided for evacuating steam from inner chamber and as jacket and when desired.
The unit is recommended for making pyrogenic free distilled water of a very high degree of purity. Made out of 5.5. special kettle element is fitted with Ejection Device/Auto cut for safety of the element in case water supply is stopped. The cock fitted to the unit is of brass C.P. A wall mounting camp is provided with the unit but without rubber tubing. Supplied with cord and plug to work on 22/230 Volts A.C.
Hot Plate Rectangular with Cast Iron Top. For continuous heating upto 3500C. The body is made of specially designed perforated P.C.R.C. sheet painted with Powder Coated with insulated elements.
It is used for Sterilization under saturated steam pressure at any selected point between 10 to 20 p.s.i. (adjustable). 'Fitted with neoprene rubber gasket, all systems are hydraulically tested up to 40 p.s.i., as a safety measure.
Economy Model: Inner S.S & Outer M .S painted with LID made of M.S plate lined with 5.5. Supported Ring and legs are made of Mild Steel. Gasket is made of silicon
Deluxe Model: Inner & Outer 5.5 with LID made of 5.5 Supported Ring and legs are made of Stainless Steel. Gasket is made of imported Silicon Rubber.
Semi Automatic:- Inner & Outer 5.5 with LID made of 5.5 Supported Ring and legs are made of Stainless Steel. Gasket is made of imported Silicon Rubber. Fitted with Semi Automatic Digital Controller with Auto Time Control System. Auto cut-off system and sound buzz system installed for user for alerting that the cycle is over.
Fully Automatic:- lnner & Outer 5.5 with LID made of 5.5 Supported Ring and legs are made of Stainless Steel. Gasket is made of imported Silicon Rubber. Fitted with Microprocessor based fully automatic logic control system with timer buzz. Unit is fitted with water level cut-off with automatic puging and exhaust valve.
