Hospital Equipment

Product Details:

Designed to carry upto 7 sieves of 8" dia it is driven b y 1/4 HP electric motor through reduction gear. The whole gear mechanism which given circular end to end motion runs in an oil bath. The tapping motion is given by hammer from top. To work on 220/230 volts single phase A.C. Supplied complete with adapter for 8" sieves but without test sieve. 

Product Details:

Mainly use for mixing of chemicals, solvents / solutions and are most suitable for shaking in Erlenmeyer flasks.  Body is mounted on heavy duty M.S. angle iron frame duly painted. The platform is made of thick mild steel sheet duly painted fitted with rubber discs to hold Erlenmeyer Flasks of different capacity. Platform is mounted on ball bearing crank shafts with a orbital dia. of approx. 1.5” to 2". Heavy duty motor coupled by means of V - Belt with pitch pulley system is housed inside the frame. Speed can be controlled through a mechanical speed control system. 50 to 200 rpm. Work on 220/230 volts A.C supply. 

Additional Information:

• Delivery Time: 2 to 3 weeks

Product Details:

Designed to carry upto 7 sieves of 8 dia it is driven by 1/4 HP electric motor. through reeducation gear. The sieve table does not rotate but in inclined form the vertical axis the directions. In addition to the Gyratory motion of the table. there is an- upward and downward movement ensuring that each square inch of the sieve is utillised. The whole gear mechanism runs is an of bath. To work on 200/ 230 volts single phase A.C. Supplied complete with adaptor for 8" sieves but without test sieves.

Product Details:

Designed for continues shaking of solutions in Erlenmeyer Flasks from 50m l to 1000ml capacity. It is a compact bench type table top model with platform fitted with rubber discs mounted on ball bearing crank shafts to give an orbital motion to the flasks, within a diameter of approximately 2”. The motor is coupled by means of a V-Belt with pitch pulley, and is mounted on a heavy and sturdy angle iron frame. Speed is controlled by mechanical speed controller. To work on 220/230 Volts A.C. Supply.

Product Details:

Yoder type motor driven sieve shaker is for carrying our we sieve analysis of material. Consists of a water reservoir and for sieve which can take upto 7 sieves of 8” dia. The shaker is driven by V4 HP Motor through a belt drive. Suitable to e on 230 volts, 50 cycles, single phase A.C.

Product Details:

Kahn racks bottles or flasks of different sizes can be shaken by adjusting the compartments provided on the shaking rack. The rate of motion can be adjusted mechanically by belt tension from 140 to 240 p.m.

Approximately t works on 220/230 volts A.C supply. WITH D.C. MOTOR

Additional Information:

• Delivery Time: 2 To 3 Weeks

Product Details:

Electrically operated suitable insertion of pathological waster having Tow chamber lower chamber for loading of waste and upper chamber relived, to burnt the gas comes out from the during ofwaste product w/o chimney.

Product Details:

Used for storing cadaverous low temperature cool conditions in order to prevent decomposition these units are double walled with outer made of M.S Sheet duly painted and inner walls of 5.5 Trays made of G.l. Sheet to carry dead bodies are provided with handles so as to carry dead bodies, trays travel on rollers fitted with ball bearings for easy movement. Hermetically sealed compressor serves refrigeration unit, to maintain temperature range of 2°C to 5°C or - 15 °C to 20oC (as ordered) unit is fitted with Digital Temperature indicator- cum- Controller. To work on 220/230 volts A.C. Supply.

Additional Information:

• Delivery Time: 2 To 3 Weeks