Laboratory Testing Equipment

Product Details:

Flocculated has been specially designed for use in water treatment plants to correctly estimate the dosing of alum and such other coagulants for treatment of water and sewage. It provides identical test conditions for all samples. Illuminated base consists of fluorescent tube mounted below translucent plastic plate to provide diffused cold light through flock samples. Flocculated consists of geared continuous run heavy duty 1/20 H.P. variable speed motor from 10 to 100 RPM with built in speed control. 5.5. stirring rods are provided with adjustable spacers to adjust the depth of stirring paddles. The stirring shaft can be removed without disturbing other stirrers. This unit is supplied without beakers to work on 220/230 Volts A.C.

Additional Information:

• Delivery Time: 2 To 3 Weeks

Product Details:

To determination of Chemical Oxygen Demand. It is a solid state block heated unit with provision for; samples to be digested at a time in 38mm. dia reaction vessels with 20ml sample size to heat at temp. Of 1 50°C 1°C± controlled by Microprocessor based state digital temp. Indicator-cum-controller. It has provision for 1 5 samples and is supplied with 15 nos. glass reaction vessels and 1 5 nos. air condensers. Fitted with a 2 hours timer, the samples after being digested for 2 hours can be analyzed using calorimeter or conventional titration method. To work on 220/230 Volts. AC.

Additional Information:

• Delivery Time: 2 To 3 Weeks

Product Details:

The Ultra Low temperature Freezer offers a wide variety of research and storage applications, such as low temperature scientific experiments, preservation of red blood plasma, white blood cell, skin, bone bacteria, semen, biomedical product, electronic devices, and low temperature testing of special material. It is suitable for Blood Banks, hospital, sanitation and an epidemic stations, electronic industries, university laboratories, defend applications. Capacity 100 liters to 600 liters Temperature Display of Both Compressor (-40'C) 

 

Product Details:

The outer chamber is made up of M. S. Sheet duly painted and inner chamber of thick 55. Sheet. The gap between two walls is fitted with high grade glass wool to avoid thermal loss. The plexi glass window makes it possible to inspect the specimen without disturbing the inner temperature. The lid of chest type unit is fitted with fluorescent tubes of 60 cms, length, on the inner side, the unit has temperature range from 5°C to 60°C and is controlled with Microprocessor Based Digital temperature lndicator-cum-controller with and accuracy of i 0.5°C. When the tube lights are ON temperature range is from 10°C to 50°C. Air circulation fan is fitted to maintain temperature uniformity throughout. Cyclic illumination conditions are controlled by an automatic timer (0-24 hrs.) fitted to the unit. It is fitted with Digital speed emter (rpm counter) ford shaking platform having variable speed. The shaker has variable speed and a platform containing 16 flasks of 50oml. capacity is supplied with the standard accessory. To work on 220/230 volts A.C. supply.

• Temp. Range from 5°C above ambient to 50°C 95,000/-
• Temp. Range from 5°C to 50°C 1,64,000/-

Optional Accessories:

• Spare Shaking Platform 8,000.00
• Additional non-shaking tray (Made of 5.5.) 6,800.00
• Built in U.V. germicidal tube light (Price for 2 nos.) 15,000.00
• Automatic Voltage Stabilizer 3.0 KVA (TRIPLE RELAY) 12,000.00

Additional Information:

• Delivery Time: 2 To 3 Weeks

Product Details:

It has a heavy cast iron base with rugged construction and two side arms for holding flasks, fitted with a F.H.P. heavy duty motor with variable speed. Can hold flasks from 100 to 1000ml capacity. Supplied with cord and plug to work on 220/ 230 volts A.C. supply.

Additional Information:

• Delivery Time: 2 To 3 Weeks

Product Details:

Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity. Inner chamber consists of S.S. And outer wall of M.S. Sheet duly painted. The gap f75mm between the outlet and inner wall is filled with special grade glass wool to prevent thermal losses.
A self cooled air circulation fan is fitted to maintain uniform temperature and humidity conditions throughout the chamber. Temp. range from 5°C above ambient too60°C is controlled by thermostat with an accuracy of ±1°C. Humidity is controlled through an HHUMIDISTAT, thus controlling the desired set humidity range from atmospheric humidity to 95% ±3%.

Inside Chamber Size (W X H X D)

• 455x710x455mm
• 605x605x605mm
• 605x910x605mm

Digital temperature indicator cum controller can be fixed at any extra cost of Rs. 20,000/-

Product Details:

Fitted with a FHP motor, it can accommodate six sieves of 6" to 8" aid. Speed can be regulated through a continuously variable speed regulator fitted to the unit. To work on 220/ 230 volts AC. 

Product Details:

Castor wheel mounted cabinet is double walled with inner chamber of 5.5. and outer wall of M.S. Sheet duly painted. The gap of 75 mm. between the outer and the inner wall is fitted with special grade glass wool /Puff Insulation prevent thermal losses. Triple walled back of the unit is fitted with two air circulation fans for maintaining temperature uniformity throughout the chamber. Full view inner glass door permits inspection of specimens, without disturbing the same. Lock and key arrangement is provided in the double walled outer door unit is fitted with door operated illumination lamp inside (the chamber, Refrigeration unit is formed by CFC Free Eco friendly compressor, The front panel is provided with separate indicator lamps for main, heating and incoming voltage. Supplied complete with 3 shelves, cord and plug to work on 220/230 A.C. supply. Temperature from 5°C to 50°C is controlled by solid state electronic digital temperature indicator-cum- controller, with an accuracy of: 05°C.

Additional Information:

• Item Code: SSIC-73

Product Details:

Fitted with automatic 3 digits LED Digital, Counting plate with illuminated standard filing ensures clearly differentiated and sharply defined colonies. Each touch of marking pencil in the Petridis increments the colony count by '1' and the glowing LED Display depicts the total colony count. Maximum colony Count possible up to mm dia lens cord and plug. To work on 220 V A.C.

Additional Information:

• Delivery Time: 2 To 3 Weeks

Product Details:

Outer chamber made of M. 5. sheet duly enamel painted with inner made up of 5.5. sheet (SS-304 grade). Front lid is made up of transparent see through plexi glass. A rotary shaker platform is provided at the base of incubator o as to shake ertyn meyer flasks. The motor ofthe unit has variable speed and is fitted outside ofthe inner chamber, at the base. The complete unit is mounted on a sturdy angle iron frame. While ordering kindly mention the capacity of flasks. Temperature is controlled by Digital Temperature Indicator-cum-controller from ambient to 70°CiO.S°C. The unit is fitted Digital RPM Meter and air circulation fan for temperature uniformity. To work on 220/230 volts A.C. Supply.

Additional Information:

• Delivery Time: 2 To 3 Weeks

Product Details:

Based on the rotating disc-splash plate principle. It produces only super fine particles of micron size, which be come part of of the atmosphere, there by reaching every corner of the room, resulting in uniform humidity. Due to the micron sized water droplets, by high speed motorized unt, they remain suspendied in the atmosphere for longer duration of time. The unit is capable of atomized upto 3 liters of water in an hour at full evaporation in the direst possible ambient conditions. The unit is provided with high speed 2800 RPM motor to run longer period, and the blades are areodynamically balanced to ensure drop less fumigation.

Additional Information:

• Delivery Time: 2 To 3 Weeks

Product Details:

Bomb calorimeter Measurement. an apparatus that can measure heats of combustion, used in various applications such as calculating the calorific value of foods and fuels.

Product Details:

Triple walled inside made stainless steel and outside mild steel sheet painted temp. Range 50⁰C to 300⁰C + 3⁰C with Micro process based PID Controller Cum Indicatorand Air Circulating fan.

Product Details:

High-tech product developed independently and integrating gas dynamics, digital signal processing and optical-mechanical-electrical integration on the basis of absorbing oversea advanced high-sensitivity microlaser sensor technology Device is characterized by high-test precision, stable performance, strong multiple functions and easy and convenient operating and can be used widely for determination of indoor and outdoor public environment and atmospheric environment, PM2.5 air quality detection and PM2.5 dust particle amount

Additional Information:

• Delivery Time: 1 week

Product Details:

SISCO” Dehumidifiers are water condensing type, base on ”Refrigeration Cycle” to avoid use expensive chemicals required for desiccant type models. The unit is self standing and is mounted on a study angle iron frame, filled with caster wheels. Dehumidifier removes the moisture from the atmosphere and fitted with hermetically sealed compressor heat exchange and water condensing coils are made of copper. Water collection tank is provided below the unit to collect condensate water. Humidity is controlled by automatic HUMIDISTAT incorporated in the unit, upto 30% + 3% RH, depending upon the ambient conditions. To achieve very low humidity, the room should have an independent window type Air Conditioner to match with the dehumidifier hear load in the room. Suitable to work on 220/230 Volts A.C Supply.

Additional Information:

• Delivery Time: 2 To 3 Weeks

Product Details:

Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity. Inner chamber consists of S.S. And outer wall of M.S. Sheet duly painted. The gap f75mm between the outer and inner wall is filled with special grade glass wool to prevent thermal losses. A self cooled air circulation fan is fitted to maintain uniform temperature and humidity conditions throughout the chamber. Temp. range from 10°C to 60°C +/-2°C is controlled by Digital Temp Controller Cum Indicator. Humidity is controlled through an Digital Humidity controller, thus controlling the desired set humidity range from 95% ±5%. Cooling by CFC Free Eco Friendly Compressor.

Inside Chamber Size (W X H X D)

• 455x710x455mm
• 605x605x605mm
• 605x910x605mm

Product Details:

Double walled the inside made up of S.S. And outside of M.S. Duly enamel painted. The gap between the two walls is fitted with high grade glass wool to minimize thermal loss. Temperature range from 50°C to 250°C +2°, is controlled by capillary type thermostat. A variable speed stirring arrangement is fitted to the unit for maintaining temperature plug to work on 220/230volts A.C. Supply.

• 250x250x250mm
• 300x300x250mm

Optional Accessories:

• Digital Temperature Indicator cum Controller.

Additional Information:

• Delivery Time: 2 TO 3 WEEKS

Product Details:

Heavy duty Permanent magnet It has a compact stirring device utilizing a rotating magnetic field (created by a Permanent magnet) which includes variable speed stirring action. Stirring is accomplished by means of small telephone rotor, which when placed in the liquid to be stirred is capable of rotation by magnetic field applied from below the container. The units is filled with pilot lamp. To work on 220

Product Details:

ldeal heater for the extractors of Sox let and other types. This apparatus is suitable to heat sox let flasks of 50- 500ml. It consists of MS. sheet housing, two vertical & two horizontal rods with adopters and screws to hold the flasks. To work on 220/230 volts A.C. supply.

• Unit of 3 test Mantle Type (Without glass parts 8: clamps) 10,000/-
• Unit of 6 test Mantle Type (Without glass parts & clamps) 15,000/-

Optional

• Digital Temp. Controller cum Indicator (Each Test) 6,000/-

Product Details:

We offer a wide range of Water Still. All glass water distillation is a unique & intelligent water distillation unit.The heating element is ceramic bobbin heater with Nichrome heating wire. Made of Stainless Double Walled construction with inner and outer chamber made of S.S The gap in between being filled with glass wool. The condenser and top are also made of S.S. The raw water is first made of pass around the tubes in the condenser where it gets heated neatly to the boiling point thus economizing the heating energy. The heated water passes to the evaporator through a water level maintaining pipe. Excess water is let out through over flow complete unit to work on 220/230Volts A.C. Supply.

 

Additional Information:

• Delivery Time: 2 TO 3 WEEKS

Product Details:

It withstands high temperature up to 350°C. The body of the mantle is spun one piece from non-rusting Aluminum (up to 5.0 Liters Capacity) duty staving painted, all heating mantles are lagged with special grade mineral wool. To work 200/ 230 Volts A/C.

Additional Information:

• Delivery Time: 2 To 3 Weeks

Product Details:

The stirrer having maximum speed upto 4000 rpm, unit is clamped to a C.P. rodfitted on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed Motor with speed regulator is fitted with S.S. Stirrer rod to give smooth and noiseless operation.